Emerson Micro Motion User Manual page 45

User Guide
MMI-20019808
Byte Access Name
4–7 Get/Set External Pressure
8 Get/Set Start/Stop Totals
9 Get/Set Reset All Process Totals
10 Get/Set Reset All Inventory Totals
11 Get/Set Start Zero
12–13 Get/Set Start Smart Meter
Verification
B.3.3 Input parameters (explicit data) for standard
configuration
To update any of these attribute values, the associated trigger byte must be toggled
before reading the attribute value (executing the Get service). See
(explicit data) for standard configuration
Class B0h, Instance 01h
Attribute Access Name
01h Get Mass flow rate unit
02h Get Density unit
03h Get Temperature unit
04h Get Volume flow rate unit
05h Get Pressure unit
06h Get Mass total/inventory unit
07h Get Volume total/inventory unit
08h Get Zero time
09h Get Standard deviation of auto
zero
0Ah Get Present flow signal offset at
zero flow
0Bh Get Failed Zero Calibration Value
User Guide
Type Notes
Float
Byte 0: Stop
1: Start
Byte 0: No action
1: Reset
Byte 0: No action
1: Reset
Byte 0: Abort or no action
1: Start
Word See Table B-20
for more information on trigger bytes.
Type Trigger Byte
WriteAttribute
U16 0Ch
U16 0Ch
U16 0Ch
U16 0Ch
U16 0Ch
U16 0Ch
U16 0Ch
U16 0Dh
Float 0Eh
Float 0Eh
Float 0Eh
Device profile
January 2019
Output parameters
Description
See Table B-7
See Table B-13
See Table B-14
See Table B-9
See Table B-15
See Table B-8
See Table B-10
Seconds
45