Emerson MVME7616E Installation And Use Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Control Unit
  5. MVME7616E
  6. Installation and use manual
Emerson MVME7616E Installation And Use Manual

Emerson MVME7616E Installation And Use Manual

Transition module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MVME7616E Transition Module
Installation and Use
6806800A43B
August 2008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MVME7616E and is the answer not in the manual?

Questions and answers

Related Manuals for Emerson MVME7616E

Summary of Contents for Emerson MVME7616E

  • Page 1 MVME7616E Transition Module Installation and Use 6806800A43B August 2008...
  • Page 2 Emerson reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of Emerson to notify any person of such revision or changes.

  • Page 3: Table Of Contents

    P2 Adapter Connectors ............39 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 4 4.7.5 5-Row P2 adapter (J4) ..........43 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 5 VME Connector (3-Row P2 adapter) ........43 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 6 List of Tables MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 7 EIA232-DTE Configuration Port 4 ........34 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 8 List of Figures MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 9: About This Manual

    MVME7616E-011 Transition Modules. These transition modules are used as the interface between the variants of the MVME51005E and MVME55006E Single Board Computers. A P2 adapter module and cable are supplied with the MVME7616E. The MVME7616E will hereafter be referred to as the MVME761.
  • Page 10 Used for on-screen output and code related Screen elements or commands in body text Used to characterize user input and to separate it Courier + Bold from system output Reference Used for references and for table and figure descriptions MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 11 No danger encountered. Pay attention to important information Summary of Changes This manual has been revised and replaces all prior editions. Part Number Publication Date Description 6806800A43A June 2006 First edition 6806800A43B August 2008 Updated to Emerson style. MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 12 > Contact Us > Online Form In “Area of Interest” select “Technical Documentation”. Be sure to include the title, part number, and revision of the manual and tell us how you used it. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 13: General Information

    Both MVME761-0x1 models use the same transition module. The MVME761-001 comes with a P2 adapter that connects to a 3-row DIN chassis backplane. The MVME761-011 comes with a P2 adapter that connects to a 5-row DIN chassis backplane. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 14: Serial Port Interface Modules

    The SIM contains the receiver and transmitter circuits for converting the input and output signals of the host VMEmodule to the appropriate serial data communication protocol. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 15: P2 Adapter Boards

    EIA-232-D DTE SIM232DTE5E 01-W3877B11A Additional SIMs may be released. Please see your Emerson representative for a complete list of SIMS that are available for the MVME761-0x1. P2 Adapter Boards The P2 adapters route the asynchronous and synchronous port, printer port, and Ethernet signals to the MVME761 transition module.

  • Page 16: Five-Row P2 Adapter (Mvme761-011)

    1. You will need to purchase or fabricate the port cables. Table 1-2 MVME761 Transition Module Connectors Type Number Description COM1 and 9-pin male DIN asynchronous serial port connector COM2 Serial port 3 26-pin female HD-26 synchronous serial port connector Serial port 4 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 17: Table 1-3 3-Row P2 Adapter Connectors (Mvme761-001)

    If you supply your own 64-line cable to connect the P2 adapter to the MVME761 transition module, the cable should not be longer than 1.5 feet. A longer cable is likely to cause problems, especially for the Ethernet and parallel port signals. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 18: Specifications

    Class A equipment. For minimum RF emissions, it is essential that you implement the following conditions: Install shielded cables on all external I/O ports Connect conductive chassis rails to earth ground to provide a path for connecting shields to earth ground Tighten all front panel screws MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 19: Hardware Preparation And Installation

    Modules (SIMs). Unpacking the Hardware The MVME761 is packed in an antistatic wrapper to protect it from static discharge. Emerson strongly recommends that you use an antistatic wrist strap and a conductive foam pad when handling the equipment. Electronic components can be extremely sensitive to electrostatic discharge (ESD).

  • Page 20: Figure 2-2 Sim Configuration

    Figure 2-3 on page 3. Gently press the top of the SIM to seat it on the transition module SIM connector. If the SIM does not seat with gentle pressure, re-check the alignment of the connectors. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 21: Figure 2-3 Installing The Sim

    Do not force the SIM onto the transition module. 4. Secure the SIM to the transition module standoffs with the two Phillips-head screws provided. Do not over tighten the screws. Figure 2-3 Installing the SIM 1911 9609 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 22: Installing The Transition Module And P2 Adapter

    P2 connector on the transition module is not compatible with the P2 connector on the chassis backplane. Emerson strongly recommends that you use an antistatic wrist strap and a conductive Use ESD foam pad when installing or upgrading a system. Electronic components, such as disk...

  • Page 23: Figure 2-4 Chassis Connections

    6. Attach the P2 adapter, for either the 3-row or 5-row version, to the backplane connector that is directly in line with the P2 connector on the host VMEmodule. 7. Orient pin 1 of the P2 adapter’s connector with pin 1 of the backplane connector. MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 24 Make sure there is good contact with the transverse mounting rails in order to minimize RF emissions. 11.Install the chassis cover, making sure that cables are not pinched by the cover. 12.Connect the power cable to the AC power source. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 25: Functional Description

    The MVME761 transition module contains a small amount of “house keeping” circuitry. Bulk capacitors are on the power sources (+5Vdc, +12Vdc, and -12Vdc). Pullup resistors put the inputs to the host board in a known high even when no SIM is installed. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 26: Figure 3-1 Transition Module Block Diagram

    P2 Multiplex Function 64-Pin DIN Connector 11638.00 9611 Figure 3-2 3-Row DIN Backplane P2 Adapter Block Diagram 8-bit Single-ended SCSI 64-pin Connector to MVME761 Transition Module SCSI Terminators 3-Row Backplane Connector 11639.00 961 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 27: P2 Signal Multiplexing (P2Mx)

    MVME761 transition module multiplex and demultiplex some of the P2 signals. This function, called P2MX is transparent to the software and the user. Four pins are used for the signal multiplexing: MXCLK MXSYNC# MXDO MXDI MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 28: Table 3-1 P2 Signal Multiplexing Sequence

    MXSYNC# is clocked out using the falling edge of MXCLK and MDXO is clocked out with the rising edge of the MXCLK. MXDI is sampled at the rising edge of MXCLK (the transition module synchronizes MXDI with MXCLK’s rising edge). MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 29: Serial Interface Module Circuitry

    -12V supply. The diodes are located on the transition module rather than on the SIM due to space limitations. For all port interfaces, the SIMs support the transmitter signal element timing as either input or output signals. MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 30: Com1 And Com2 Asynchronous Serial Ports

    The asynchronous serial port (COM1 and COM2) configuration is shown in the next figures.. Figure 3-5 EIA-574 DTE Port Configuration SOUT1 RTS1# DTR1# SIN1 COM1 CTS1# DSR1# DCD1# RI1# PC87308 P2/P2MX SOUT2 RTS2# DTR2# SIN2 COM2 CTS2# DSR2# DCD2# RI2# VME Module MVME761 Transition Module MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 31: Asynchronous/Synchronous Serial Ports

    Figure 3-6 EIA232-DCE Copnfirguration Port 3 MVME761 VME MODULE Z85230 SCC HD26 EIA232-DCE SIM RTS# CTS# DCD# TRXC RTXC P2/P2MX Z8536 CIO DTR# LLB# RLB# DSR# Header J18 1-2 Header J2 2-3 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 32: Figure 3-7 Eia232-Dce Configuration Port 4

    EIA232-DCE Configuration Port 4 VME MODULE MVME761 Z85230 SCC HD26 EIA232-DCE SIM RTS# CTS# DCD# TRXC RTXC P2/P2MX Z8536 CIO DTR# LLB# RLB# DSR# Headers: J16 2-3 Header J3 2-3 J17 1-2 J19 1-2 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 33: Figure 3-8 Eia232-Dte Configuration Port 3

    Functional Description Figure 3-8 EIA232-DTE Configuration Port 3 VME MODULE MVME761 Z85230 SCC HD26 EIA232-DTE SIM RTS# CTS# DCD# TRXC RTXC P2/P2MX Z8536 CIO DTR# LLB# RLB# DSR# Header J18 2-3 Header J2 1-2 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 34: Figure 3-9 Eia232-Dte Configuration Port 4

    EIA232-DTE Configuration Port 4 MVME761 VME MODULE Z85230 SCC HD26 EIA232-DTE SIM RTS# CTS# DCD# TRXC RTXC P2/P2MX Z8536 CIO DTR# LLB# RLB# DSR# Headers: J16 2-3 Header J3 1-2 J17 2-3 J19 1 2 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 35: Connector Pin Assignments

    Signal C- (R- for RJ-45 J9) C+ (R+ for RJ-45 J9) +12VF PRSTB# PRD0 PRD1 PRD2 PRD3 PRD4 PRD5 PRD6 PRD7 PRACK# PRBSY PRPE PRSEL INPRIME# PRFAULT# AUTOFD# SELIN# TXD3 RXD3 RTXC3 TRXC3 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 36: Asynchronous Serial Port Connectors (J5/J6)

    DB9 connectors, J5 and J6. The connector shields for these ports are tied to chassis ground. The pin assignments and signal mnemonics for these connectors are listed in Table 4-2. Table 4-2 COM1 and COM2 Pin Assignments Signal MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 37: Asynchronous/Synchronous Serial Port Connectors (J7/J8)

    No Connect Table 4-4 Serial Port 4 Pin Assignments Signal Signal No Connect SP4_P14 TXD4 TXCI4 RXD4 SP4_P16 RTS4 RXCI4 CTS4 LLB4 DSR4 SP4_P19 DTR4 DCD4 RLB4 SP4_P9 SP4_P10 SP4_P23 SP4_P11 TXCO4 SP4_P12 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 38: Parallel I/O Port Connector (J4)

    The pin assignments and signal mnemonics for this connector are listed in Table 4-5. Table 4-5 Parallel I/O Connector Pin Assignments Signal Signal PRBSY PRSEL PRACK_ PRFAULT_ PRPE PRD0 PRD1 PRD2 PRD3 PRD4 PRD5 PRD6 PRD7 INPRIME_ PRSTB_ SELIN_ AUTOFD_ Pull-up No Connect MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 39: Ethernet Connector (J9)

    The 8-bit SCSI connector on the 3-row DIN backplane P2 Adapter is a 50-pin connector, J2. The pin assignments and signal mnemonics for this connector are listed in Table 4-7. Table 4-7 8-bit SCSI Connector (3-Row P2 adapter) Signal Signal TERMPWR SDB0 SDB1 SDB2 SDB3 SDB4 SDB5 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 40: 3-Row P2 Adapter (J3)

    The pin assignments and signal mnemonics for this connector are listed in Table 4-8. Table 4-8 VME Connector (3-Row P2 adapter) Signal Signal DCD3 DTR3 TXD1 RXD1 PRSTB_L RTS1 +12VF PRD0 CTS1 PRD2 PRD1 TXD4 PRD4 PRD3 RXD4 PRD6 PRD5 RTS4 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 41: 5-Row P2 Adapter (J1)

    The pin assignments and signal mnemonics for this connector are listed in Table 4-9. Table 4-9 16-bit SCSI Connector (5-Row P2 adapter) Signal Signal SDB12 SDB13 SDB14 SDB15 DBP1 SDB0 SDB1 SDB2 SDB3 SDB4 SDB5 SDB6 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 42: Pmc I/O, 5-Row P2 Adapter (J3)

    The PMC I/O connector on the 5-row DIN backplane P2 Adapter is a 64-pin connector, J3. The pin assignments and signal mnemonics for this connector are listed in Table 4-10. Table 4-10 PMC I/O Connector (5-Row P2 adapter) Signal Signal PMCIO0 PMCIO16 PMCIO1 PMCIO17 PMCIO2 PMCIO18 MVME7616E Transition Module Installation and Use (6806800A43B)

  • Page 43: 5-Row P2 Adapter (J4)

    The J4 connector on the 5-row P2 adapter is a VME, 64-pin male connector used for output to the P2 connector on the MVME761. Table 4-11 VME Connector (3-Row P2 adapter) Signal Signal DCD3 DTR3 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 44 PRD0 CTS1 PRD2 PRD1 TXD4 PRD4 PRD3 RXD4 PRD6 PRD5 RTS4 PRD7 TRXC4 DTR4 PRACK_L CTS4 PRPE PRBSY DCD4 PRINIT_L PRSEL RTXC4 PRFAULT_L TXD2 TXD3 RXD2 CTS2 RXD3 RTS2 CTS3 DCD2 RTS3 DTR2 MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 45 J4, VME P2 Adapter cooling requirements P2 adapter connectors P2 adapter, 3-row P2 adapter, 5-row DIN connector P2 adapter, connectors P2 adapter, installation P2 adapter, pin assignments EIA-232-D, circuitry parallel port pin assignments EMI,ESD MVME7616E Transition Module Installation and Use (6806800A43B)
  • Page 46 SIMs temperature product description TTL-level signals relative humidity variants RF emissions VMEmodules, supported running SCSI devices MVME7616E Transition Module Installation and Use (6806800A43B)

This manual is also suitable for:

Mvme7616e seriesMvme7616e-001Mvme7616e-011Mvme761p26e-001Mvme761p2-6e011

Table of Contents