Displaying Lacp Settings And Status For The Remote Side - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual
Smc networks gigabit ethernet switch management guide
Hide thumbs
Also See for SMC8612XL3 F 1.0.1.3:
- Technical specifications (2 pages) ,
- Installation manual (72 pages) ,
- Brochure (4 pages)
Table of Contents
Advertisement
C
ONFIGURING THE
CLI – The following example displays the LACP configuration settings
and operational state for the local side of port channel 1.
Console#show 1 lacp internal3-28
Channel group : 1
-------------------------------------------------------------------------
Oper Key : 4
Admin Key : 0
Eth 1/1
-------------------------------------------------------------------------
LACPDUs Internal : 30 sec
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 4
Oper Key : 4
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization, aggregation,
.
.
.
Console#
Displaying LACP Settings and Status for the Remote Side
You can display configuration settings and the operational state for the
remote side of an link aggregation.
3-108
S
WITCH
long timeout, LACP-activity
- Quick Links:
- Connecting to the Switch
- Resetting the System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SMC8612XL3 F 1.0.1.3 and is the answer not in the manual?
Questions and answers
RPU you light is off. what does it mean? it doesnt even blink when powering the switch. How to I reset the switch?
If the RPU (Redundant Power Unit) light is off on the SMC Networks SMC8612XL3 switch, it means that no redundant power supply is connected.
To reset the switch, you can typically do the following:
1. Use the command line interface (CLI) to issue a reset command if available.
2. Power cycle the switch by turning it off and then back on.
3. If needed, press the reset button on the switch if it has one.
Ensure you save any configurations before resetting to avoid losing settings.
This answer is automatically generated