Show Interfaces Switchport - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual
Smc networks gigabit ethernet switch management guide
Hide thumbs
Also See for SMC8612XL3 F 1.0.1.3:
- Technical specifications (2 pages) ,
- Installation manual (72 pages) ,
- Brochure (4 pages)
Table of Contents
Advertisement
Example
Console#show interfaces counters ethernet 1/7
Ethernet 1/7
Iftable stats:
Octets input: 30658, Octets output: 196550
Unicast input: 6, Unicast output: 5
Discard input: 0, Discard output: 0
Error input: 0, Error output: 0
Unknown protos input: 0, QLen output: 0
Extended iftable stats:
Multi-cast input: 0, Multi-cast output: 3064
Broadcast input: 262, Broadcast output: 1
Ether-like stats:
Alignment errors: 0, FCS errors: 0
Single Collision frames: 0, Multiple collision frames: 0
SQE Test errors: 0, Deferred transmissions: 0
Late collisions: 0, Excessive collisions: 0
Internal mac transmit errors: 0, Internal mac receive errors: 0
Frame too longs: 0, Carrier sense errors: 0
Symbol errors: 0
RMON stats:
Drop events: 0, Octets: 227208, Packets: 3338
Broadcast pkts: 263, Multi-cast pkts: 3064
Undersize pkts: 0, Oversize pkts: 0
Fragments: 0, Jabbers: 0
CRC align errors: 0, Collisions: 0
Packet size <= 64 octets: 3150, Packet size 65 to 127 octets: 139
Packet size 128 to 255 octets: 49, Packet size 256 to 511 octets: 0
Packet size 512 to 1023 octets: 0, Packet size 1024 to 1518 octets: 0
Console#
show interfaces switchport
This command displays the administrative and operational status of the
specified interfaces.
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
-14
- Quick Links:
- Connecting to the Switch
- Resetting the System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SMC8612XL3 F 1.0.1.3 and is the answer not in the manual?
Questions and answers
RPU you light is off. what does it mean? it doesnt even blink when powering the switch. How to I reset the switch?
If the RPU (Redundant Power Unit) light is off on the SMC Networks SMC8612XL3 switch, it means that no redundant power supply is connected.
To reset the switch, you can typically do the following:
1. Use the command line interface (CLI) to issue a reset command if available.
2. Power cycle the switch by turning it off and then back on.
3. If needed, press the reset button on the switch if it has one.
Ensure you save any configurations before resetting to avoid losing settings.
This answer is automatically generated