Open Shortest Path First (Ospf) - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

Field
SendMode
ReceiveMode
Poison
Authentication
show ip rip status
Interface
RcvBadPackets
RcvBadRoutes
SendUpdates
show ip rip peer
Peer
UpdateTime
Version
RcvBadPackets
RcvBadRoutes

Open Shortest Path First (OSPF)

Command
General Configuration
router ospf
router-id
compatible rfc1583 Calculates summary route costs using RFC 1583
default-information
originate
timers spf
-144
Description
RIP version sent on this interface (none, RIPv1, RIPv2, or
RIPv2-broadcast)
RIP version received on this interface (none, RIPv1, RIPv2,
RIPv1 or RIPv2)
Shows if split-horizon, poison-reverse, or no protocol message
loopback prevention method is in use.
Shows if authentication is set to simple password or none.
IP address of the interface.
Number of bad RIP packets received.
Number of bad routes received.
Number of route changes.
IP address of a neighboring RIP router.
Last time a route update was received from this peer.
Whether RIPv1 or RIPv2 packets were received from this peer.
Number of bad RIP packets received from this peer.
Number of bad routes received from this peer.
Function
Enables or disables OSPF
Sets the router ID for this device
(OSPFv1)
Generates a default external route into an autonomous
system
Configures the hold time between consecutive SPF
calculations
Mod Page
e
GC 3-14
6
RC 3-14
7
RC 3-14
8
RC 3-14
9
RC 3-15
0