Show Ip Dhcp Binding - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

• address - The address of the binding to clear.
• * - Clears all automatic bindings.
Default Setting
None
Command Mode
Privileged Exec
Usage Guidelines
• An address specifies the client's IP address. If an asterisk (*) is used as
the address parameter, the DHCP server clears all automatic bindings.
• Use the no host command to delete a manual binding.
• This command is normally used after modifying the address pool, or
after moving DHCP service to another device.
Example.
Console#clear ip dhcp binding *
Console#
Related Commands

show ip dhcp binding (3-175)

show ip dhcp binding
Use this command to display address bindings on the DHCP server.
Syntax
show ip dhcp binding [address]
address - Specifies the IP address of the DHCP client for which bindings
will be displayed.
Default Setting
None
DHCP C
OMMANDS
4-175