Show Router Dvmrp - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

As shown below, this command clears everything from the route table
except for the default route.
Console#clear ip dvmrp route
clear all ip dvmrp route
Console#show ip dvmrp route
Source
--------------- --------------- --------------- --------- ------ ------
------
10.1.0.0
Console#

show router dvmrp

Use this command to display the global DVMRP configuration settings.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the global DVMRP settings described in the
preceding pages:
• Admin Status, router dvmrp, (page 3-191)
• Probe Interval (page 3-192)
• Nbr Expire (page 3-193)
• Minimum Flash Update Interval (page 3-194)
• Prune Lifetime (page 3-195)
• Route Report (page 3-194
• Default Gateway (page 3-196)
• Metric of Default Gateway (page 3-198)
Example
Mask Upstream_nbr
255.255.255.0
M
ULTICAST
Interface Metric UpTime Expire
10.1.0.253 vlan1
R C
OUTING OMMANDS
1 1840 0
-199