Setting Community Access Strings - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

Smc networks gigabit ethernet switch management guide
Hide thumbs Also See for SMC8612XL3 F 1.0.1.3:
Table of Contents

Advertisement

Setting Community Access Strings

You may configure up to five community strings authorized for
management access. All community strings used for IP Trap Managers
should be listed in this table. For security reasons, you should consider
removing the default strings.
Command Attributes
SNMP Community Capability – Indicates that the switch supports
up to five community strings.
Community String – A community string that acts like a password
and permits access to the SNMP protocol.
Default strings: "public" (read-only access), "private" (read/write access)
Range: 1-32 characters, case sensitive
Access Mode
-
-
Web – Click SNMP, Configuration. Add new community strings as
required, select the access rights from the Access Mode drop-down list,
then click Add.
Read-Only – Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
Read/Write – Specifies read-write access. Authorized
management stations are able to both retrieve and modify MIB
objects.
S
N
IMPLE
ETWORK
M
ANAGEMENT
P
ROTOCOL
3-37

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMC8612XL3 F 1.0.1.3 and is the answer not in the manual?

This manual is also suitable for:

8612xl3 - annexe 1Tigerswitch smc8612xl3

Table of Contents