Show Ip Traffic - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

Command Usage
If the address is specified without the netmask parameter, the router
displays all routes for the corresponding natural class address
(page 3-134).
Example
Console#show ip route
Ip Address
--------------- --------------- --------------- ---------- ------ ---------
0.0.0.0
10.2.48.2
10.2.5.6
10.3.9.1
Total entry: 4
Console#
Field Description
Ip Address IP address of the destination network, subnetwork, or host. Note that the
address 0.0.0.0 indicates the default gateway for this router.
Netmask Network mask for the associated IP subnet.
Next Hop IP address of the next hop (or gateway) used for this route.
Protocol The protocol which generated this route information. (Values: static, local,
RIP, OSPF)
Metric Cost for this interface.
Interface VLAN interface through which this address can be reached.

show ip traffic

Use this command to display statistics for IP, ICMP, UDP, TCP and ARP
protocols.
Command Mode
Privileged Exec
Command Usage
For a description of the information shown by this command, see
"Displaying Statistics for IP Protocols" on page 3-263.
-130
Netmask
0.0.0.0
255.255.252.0
255.255.255.0
255.255.255.0
Next Hop Protocol
10.2.48.102
10.2.48.16
10.2.8.12
10.2.9.254 OSPF-intra
Metric Interface
static 0
local 0
RIP 1
2
1
1
2
3