Configuring Domain Name Service; Configuring General Dns Server Parameters - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

C
ONFIGURING THE
CLI – The following shows the IGMP groups currently active on VLAN
1.
Console#show ip igmp groups vlan 13-114
GroupAddress
--------------- --------------- --------------- -------- -------- ---------
234.5.6.8
Console#

Configuring Domain Name Service

The Domain Naming System (DNS) service on this switch allows host
names to be mapped to IP addresses using static table entries or by
redirection to other name servers on the network. When a client device
designates this switch as a DNS server, the client will attempt to resolve
host names into IP addresses by forwarding DNS queries to the switch,
and waiting for a response.
You can manually configure entries in the DNS table used for mapping
domain names to IP addresses, configure default domain names, or specify
one or more name servers to use for domain name to address translation.

Configuring General DNS Server Parameters

Command Usage
• To enable DNS service on this switch, first configure one or more
name servers, and then enable domain lookup status.
• To append domain names to incomplete host names received from a
3-206
S
WITCH
InterfaceVlan
1
Lastreporter
10.1.5.19
Uptime Expire
7068 220
V1Timer
0