Vlan Commands; Editing Vlan Groups; Vlan Database - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Groups
Editing VLAN Groups Sets up VLAN groups, including name, VID and state
Configuring VLAN
Interfaces
Displaying VLAN
Information
Configuring Protocol
VLANs
Configuring Private
VLANs

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
-54
Function
Configures VLAN interface parameters, including ingress
and egress tagging mode, ingress filtering, PVID, and
GVRP
Displays VLAN groups, status, port members, and MAC
addresses
Configures protocol-based VLANs based on frame type
and protocol
Configures private VLANs, including uplink and
downlink ports
Function
Enters VLAN database mode to add, change,
and delete VLANs
Configures a VLAN, including VID, name and
state
Page
3-54
3-57
3-64
3-65
3-70
Mode Page
GC 3-54
VC 3-55