802.1Q Vlan Static Table Configuration - SMC Networks SMC8606T Management Manual

Tigerswitch 1000 gigabit ethernet switch
Hide thumbs Also See for SMC8606T:
Table of Contents

Advertisement

C
I
ONSOLE
NTERFACE
Parameter
Status
Current Egress Ports
Current Untagged
Ports
[Show]
[More]

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN, or
prevent a port from being automatically added to a VLAN via the
GVRP protocol. (Also, note that all ports can only belong to one
untagged VLAN. This is set to VLAN 1 by default, but can be
changed via the 802.1Q VLAN Port Configuration screen on page
2-60
Description
Shows how this VLAN was added to the
switch:
Dynamic GVRP: Automatically learned via
GVRP.
Permanent: Added as a static entry.
Shows the ports which have been added to
the displayed VLAN group, where "1"
indicates that a port is a member and "0" that
it is not.
If a port has been added to the displayed
VLAN (see Current Egress Ports), its entry in
this field will be "1" if the port is untagged or
"0" if tagged.
Displays the members for the VLAN indicated
by the "Sorted by VID" field.
Displays any subsequent VLANs if configured.

Advertisement

Table of Contents
loading

This manual is also suitable for:

8606t - annexe 1

Table of Contents