Configuring Static Unicast Addresses - SMC Networks SMC8606T Management Manual

C I
ONSOLE NTERFACE

Configuring Static Unicast Addresses

Use the Static Unicast Address Table Configuration screen to
manually configure host MAC addresses in the unicast table. You
can use this screen to associate a MAC address with a specific
VLAN ID and switch port as shown below.
VID
------------------------------------------------------------
Sorted by : VID + MAC
VID : 1
MAC : 00-00-00-00-00-00
[Show]
Parameter
VID
MAC Address
Port
2-76
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Static Unicast Address Table Configuration >
MAC Address
[More]
Use <TAB> or arrow keys to move. <Enter> to select
Description
The VLAN group this port is assigned to.
The MAC address of a host device attached to this
switch.
The port the host device is attached to.
Port
VID : 1 MAC
Port : 1
Status : Permanent
[Set]
<OK>
Status
: 00-00-00-00-00-00