SMC Networks SMC8606T Management Manual page 108

Tigerswitch 1000 gigabit ethernet switch
Hide thumbs Also See for SMC8606T:
Table of Contents

Advertisement

W
I
EB
NTERFACE
Parameter
IP Address
Subnet Mask
Gateway IP
Address
MAC Address
Maximum
Number of
Telnet sessions
3-12
Default
Description
10.1.0.1
IP address of the switch you are
managing. The switch supports
SNMP over UDP/IP transport
protocol. In this environment, all
systems on the Internet, such as
network interconnection devices and
any PC accessing the switch are
assigned an IP address. Valid IP
addresses consist of four decimal
numbers, of 0 to 255, separated by
periods. Anything outside of this
format will not be accepted by the
configuration program.
255.255.0.0
Subnet mask of the switch. This
mask identifies the host address bits
used for routing to specific subnets.
0.0.0.0
The gateway that the switch's agent
uses to pass data to the management
station. Note that the gateway must
be defined if the management station
is located in a different IP segment.
Physical address of the switch.
4
Sets the number of concurrent
Telnet sessions allowed to access the
switch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

8606t - annexe 1

Table of Contents