Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown
below.
Broadcast control on all ports :
Parameter
Broadcast control on
all ports
Threshold
Broadcast Control
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Broadcast Storm Control Configuration >
Port
Threshold
-------------------------------------------------------
1
2
3
4
5
6
7
8
<APPLY>
Use <TAB> or arrow keys to move. <Enter> to select
Description
Allows you to enable/disable broadcast storm
control for all ports on the switch.
The packet-per-second threshold for broadcast
packets on the port.
(Default is 500 pps.)
Enables/disables broadcast control for the port.
When enabled, the switch will employ a
broadcast-control mechanism if the
packet-per-second threshold is exceeded. This
mechanism limits the amount of broadcasts passed
by the port to half of the received
packet-per-second count. The control mechanism
remains in effect until the number of received
broadcasts falls back below the packet-per-second
threshold. (Default is Enabled.)
500
500
500
500
500
500
500
500
<OK>
C
I
ONSOLE
[Enable]
[Disable]
Broadcast Control
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
<CANCEL>
NTERFACE
2-49