Using A Port Mirror For Analysis - SMC Networks SMC8606T Management Manual

W I
EB NTERFACE

Using a Port Mirror for Analysis

You can mirror traffic from any source port to a target port for
real-time analysis. You can then attach a network sniffer or RMON
probe to the target port and study the traffic crossing the source port
in a completely unobtrusive manner. When mirroring port traffic,
note that the target port must be configured in the same VLAN and be
operating at the same duplex mode as the source port (see VLAN
Static List on page 3-38).
You can use the port mirror configuration screen to designate a single
port pair for mirroring as shown below:
Parameter
Status
Mirror Source
Port
Mirror Target Port
3-50
Description
Enables/disables port mirroring.
The port whose traffic will be monitored.
The port that will duplicate or "mirror" all the traffic
happening on the monitored port.