C
I
ONSOLE
NTERFACE
Using a Mirror Port for Analysis
You can mirror traffic from any source port to a target port for
real-time analysis. You can then attach a network sniffer or RMON
probe to the target port and study the traffic crossing the source
port in a completely unobtrusive manner. When mirroring port
traffic, note that the target port must be configured in the same
VLAN as the source port (see "Configuring Virtual LANs" on page
2-55).
You can use the Mirror Port Configuration screen to designate a
single port pair for mirroring as shown below:
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Mirror Source Port
Mirror Target Port
Status
2-44
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Mirror Port Configuration >
Mirror Source Port : Port 1
Mirror Target Port : Port 2
Status
<OK>
Description
The port whose traffic will be monitored.
The port that will duplicate or "mirror" all the
traffic happening on the monitored port.
Enables or disables the mirror function.
: DISABLED
<CANCEL>