Spanning Tree Configuration
The following figures and tables describe Bridge STA configuration.
Switch
Parameter
Usage
Priority
Default
Description
Enabled
Enable this parameter to participate in an
STA-compliant network.
32,768
Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. (Remember that the lower
the numeric value, the higher the priority.)
However, if all devices have the same priority,
the device with the lowest MAC address will
then become the root device.
Range: 0 - 65535
W
I
EB
NTERFACE
3-27