Table of Contents
Advertisement
Selection
Serial Port
Configuration
SNMP Configuration
Console Login
Configuration
TFTP Download
New Software
Configuration Save
and Restore
Switch Configuration
Menu
Port Configuration
Port State
Spanning Tree
Configuration
Spanning Tree
Information
Mirror Port
Configuration
Port Trunking
Configuration
IGMP Configuration
Description
Sets communication parameters for the serial
port, including management mode, baud rate,
console time-out, and screen data refresh
interval.
Activates traps; and configures communities
and trap managers.
Sets user names and passwords for system
access, as well as the invalid password
threshold and lockout time.
Downloads new version of firmware to update
your system (in-band).
Saves the switch configuratin to a file on the
TFTP server. This file can be later downloaded
to restore the configuration.
Enables any port, enables/disables flow
control, and sets communication mode to
auto-negotiation, full duplex or half duplex.
Displays operational status, including link
state, flow control method, and duplex mode.
Enables Spanning Tree Algorithm; also sets
parameters for hello time, maximum message
age, switch priority, and forward delay; as well
as port priority and path cost.
Displays full listing of parameters for the
Spanning Tree Algorithm.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
C
I
ONSOLE
NTERFACE
2-3
Advertisement
Table of Contents
