Vlan Configuration (Vlan) - SMC Networks SMC6709L2 Management Manual

C L
OMMAND INE

VLAN Configuration (vlan)

The VLAN configuration commands include the following items
VLAN Commands
add vlan <name> vid <number> protocol <protocol id> ports <portlist> [tag|untag]
Creates a VLAN group.
name – ASCII string from 1 to 15 characters.
number – VLAN ID from 1-4094.
protocol id – Protocol number from 0-18. (See the following table.)
config vlan <name> [tag|untag] <portlist>
Configures specified VLAN ports as tagged or untagged.
config vlan <name> addport <portlist> [tag|untag]
Adds port(s) to an existing VLAN as tagged or untagged.
config vlan <name> delport <portlist>
Deletes port(s) from an existing VLAN.
config vlan <name> protocol <protocol id>
Limits an existing VLAN to the specified protocol.
protocol id – Protocol number from 0-18. (See the following table.)
config vlan pvid <1~4094> ports <portlist>
Sets a default VLAN ID for the specified port(s).
delete vlan <name>
Deletes the specified VLAN.
delete vlan vid <1~4094>
Deletes the specified VLAN.
enable vlan gvrp
Configures the switch to use 802.1Q VLANs with GVRP.
disable vlan gvrp
Configures the switch to use 802.1Q VLANs without GVRP.
show vlantbl [<name>]
Displays configuration settings for all VLANs or for the specified VLAN.
show vlantblindex
Displays all configured VLANs, sorted by VLAN ID.
5-6
I
NTERFACE
.