Table of Contents
Advertisement
W
I
EB
NTERFACE
Parameter
Acceptable Frame
Type
1
Ingress Filtering
GVRP Status
GVRP Failed
Registrations
GVRP PDU
2
Origin
1. This control does not affect VLAN independent BPDU frames, such as
GVRP or STP. However, it does affect VLAN dependent BPDU frames,
such as GMRP.
2. GVRP is not available for the current firmware release.
3-42
Description
This switch accepts "All" frame types, including
VLAN tagged or VLAN untagged frames. Note that
all VLAN untagged frames received on this port are
assigned to the PVID for this port.
1
If set to "True," incoming frames for VLANs which
do not include this port in their member set will be
discarded at the inbound port.
2
Enables or disables GVRP for this port. When
disabled, any GVRP packets received on this port
will be discarded and no GVRP registrations will be
propagated from other ports.
Note that, before this port setting takes effect, GVRP
must be enabled for the switch (see Configuring
Bridge MIB Extensions on page 3-32).
The total number of failed GVRP registrations, for
2
any reason, on this port.
The Source MAC Address of the last GVRP message
received on this port.
Advertisement
Table of Contents
