Configuring The Serial Port - SMC Networks SMC8606T Management Manual

C I
ONSOLE NTERFACE

Configuring the Serial Port

You can access the on-board configuration program by attaching a
VT100 compatible device to the switch's serial port. (For more
information on connecting to this port, see "Required
Connections" on page 1-2.) The communication parameters for
this port can be accessed from the Serial Port Configuration screen
shown below and described in the following table.
Parameter
Management
Mode
Baud Rate
Data bits
2-16
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Serial Port Configuration >
Management Mode
Baud rate
Data bits
Stop bits
Parity
Time-Out (in minutes)
<APPLY>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Default
Console
Mode
19200
8 bits
: CONSOLE MODE
: 19200
: 8
: 1
: NONE
: 10
<OK>
Description
Indicates that the console port
settings are for direct console
connection.
The rate at which data is sent between
devices.
Options : 2400, 4800, 9600, 19200 bps,
and Auto detection
Sets the data bits of the RS-232 port.
Options : 7, 8
<CANCEL>