C
I
ONSOLE
NTERFACE
Assigning SNMP Parameters
Use the SNMP Configuration screen to display and modify
parameters for the Simple Network Management Protocol (SNMP).
The switch includes an SNMP agent which monitors the status of
its hardware, as well as the traffic passing through its ports. A
computer attached to the network, called a Network Management
Station (NMS), can be used to access this information. Access
rights to the switch are controlled by community strings. To
communicate with the switch, the NMS must first submit a valid
community string for authentication. The options for configuring
community strings and related trap functions are described in the
following sections.
Parameter
Send
Authentication
Fail Traps
SNMP Security
IP Trap Managers
2-18
SMC TigerSwitch 1000 Local Management -- SMC8606T
Send Authentication Fail Traps : ENABLED
SNMP Security
IP Trap Managers
<APPLY>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Description
Issue a trap message to specified IP trap managers
whenever authentication of an SNMP request fails.
(The default is enabled.)
Assigns SNMP access based on specified strings.
Specifies management stations that will receive
authentication failure messages or other trap
messages from the switch.
< SNMP Configuration >
<OK>
<CANCEL>