Table of Contents
Advertisement
Parameter
Current Number
of 802.1Q VLANs
Configured
Note: All ports are assigned only to VLAN 1 by default.
VLAN Current Table
This screen shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a
large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based VLAN
for one or two switches, you can assign ports to the same untagged
VLAN see "VLAN Port Configuration" on page 3-41. The current
configuration is shown in the following screen.
Parameter
VLAN Entry
Delete Count
VLAN ID
Up Time at
Creation
Status
Description
The number of VLANs currently configured on this
switch.
Description
The number of times a VLAN entry has been deleted
from this table.
The ID for the VLAN currently displayed.
The value of sysUpTime (System Up Time) when
this VLAN was created.
Shows how this VLAN was added to the switch:
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
W
I
EB
NTERFACE
3-37
Advertisement
Table of Contents
