Downloading System Software
Using TFTP Protocol to Download Over the Network
Use the TFTP Download menu to load software updates into the
switch. The download file should be an SMC8606T binary file from
SMC; otherwise the switch will not accept it. The success of the
download operation depends on the accessibility of the TFTP
server and the quality of the network connection. After
downloading the new software, the switch will automatically
restart itself. Parameters shown on this screen are indicated in the
following figure and table.
Parameter
Download Server
IP
Agent Software
Upgrade
Download
Filename
Download Mode
[Process TFTP
Download]
SMC TigerSwitch 1000 Local Management -- SMC8606T
< TFTP Download New Software >
Download Server IP :
Agent Software Upgrade
Download Filename
Download Mode
[Process TFTP Download]
Download status : Complete
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Description
IP address of a TFTP server.
Indicates that the switch is enabled for software
upgrades.
The binary file to download to the switch.
Downloads to permanent flash ROM.
Issues a request to the TFTP server to download
the specified file.
C
: ENABLED
:
: PERMANENT
<OK>
I
ONSOLE
NTERFACE
<CANCEL>
2-23