Trap Managers - SMC Networks SMC8606T Management Manual

Trap Managers

The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Parameter
Trap Manager
Capability
Trap Manager IP
Address
Trap Manager
Community String
Add/Remove
Enable Authentication
Traps
Description
Up to 5 trap managers may be used.
IP address of the trap manager.
A community authorized to receive trap
messages.
Add/remove strings from the active list.
Issues a trap message to specified IP trap
managers whenever authentication of an SNMP
request fails.
Default: enabled
W I
EB NTERFACE
3-15