COPIER►BASIC PROCEDURE FOR MAKING COPIES
Tap the [Staple / Punch] key.
1
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-28)
Select punching and set the position.
2
After the settings are completed, tap
In normal mode
• You can select the offset output checkbox
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.
.
to have each set of output be offset from the previous set to enable
2-46