Sharp MX-M6570 User Manual page 246

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
Perform steps 1 to 2 in
1
Tap the [by Size] key.
2
3
Copy Ratio
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Source
Input
inch
Input
inch
Others
Tap the image size and output size areas, and enter the sizes using the numeric keys.
• If you have entered an incorrect size:
Tap the [C] key on the numeric keys that appears when you tap the entry area, and set to the correct size.
• To cancel all settings:
Tap the [CA] key.
Using the preset ratio key (page
Original
No. of copies
1
Change Size/Direction.
Paper Select
Change Paper Feed Tray
2-Sided Copy
Background Adjustment
Output
Copy Ratio
Input
inch 0
Input
0
inch
Preview
Proof Copy
3 8½x14
4 11x17 8½x11
Specify the X and Y dimensions of the
image size and those of the output
size.
Check that a paper size suitable for the ratio is selected.
After the settings are completed, tap
CA
Start
2-27
2-23).
.