Sharp MX-M6570 User Manual page 242

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Using the preset ratio key
Tap the [Copy Ratio] key.
1
► COPY MODE (page 2-3)
2
Copy Ratio
Auto Image
By Paper Size
Original 11x17
Paper 11x17
CA
Preview
• If you tap the [Slightly Reduce (3% Reduction)] key, the ratio will be set lower than the specified one by 3%.
In normal mode
• There are two setting screens. Use the [Other Ratio] key to switch between the screens.
• To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
• Up to two frequently used ratio values can be added to the preset ratio key, respectively for enlargement and
reduction.
To cancel all settings:
Tap the [CA] key.
Specifying the paper size
Tap the [Copy Ratio] key.
1
► COPY MODE (page 2-3)
2
Copy Ratio
Auto Image
By Paper Size
Original 11x17
Paper 11x17
CA
Preview
To cancel all settings:
Tap the [CA] key.
( 25~200 )
100
%
Slightly Reduce
(3% Reduction)
8½x11
8½x11
1
Copies Start
( 25~200 )
100
%
Slightly Reduce
(3% Reduction)
8½x11
8½x11
1
Copies Start
Tap to set the ratio.
After the settings are completed, tap
Check that a paper size suitable for the ratio is selected.
Specify the original size (paper size of
the loaded original) and the copy size
(paper size of the copy output).
After the settings are completed, tap
2-23
.
.
.