Before Using The Machine As A; Copier; Easy Mode - Sharp MX-M6570 User Manual

COPIER►BEFORE USING THE MACHINE AS A COPIER

BEFORE USING THE MACHINE AS A

COPIER

COPY MODE
There are two modes for copying: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most copy jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.

EASY MODE

Easy mode makes it easy to select basic settings for copying.
1st screen
Show the size of the
placed original.
► SELECTING THE
ORIENTATION
AND SIZE OF THE
ORIGINAL (page
2-28)
Reset all settings.
Scans the original and shows a preview
image.
2nd screen
Select function to be set
up.
You can select these functions in easy mode.
• Paper Select ►page 2-11
• 2-Sided Copy ►page 2-15
• Copy Ratio ►page 2-21
• Staple / Punch ►page
To select a function in easy mode
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] →
[Easy Copy].
Original
8½x11
Paper
2-Sided Copy
Select
8½x11
Tray 1 1 → 1
CA
Preview
► PREVIEW SCREEN (page 1-20)
Original
8½x11
Original
CA
Preview
2-39, ►page 2-45
Copy Ratio Staple / Punch
100%
Copies 1
Enter the number of copies.
Exposure N-Up
Auto Off
1
Copies
• Original ►page 2-28
• Exposure ►page 2-18
• N-Up ►page 2-55
• Card Shot ►page 2-59
2-3
Change to normal mode.
► NORMAL MODE
Detail
(page 2-4)
Select function to be set up.
Off
Change the function
display.
Starts copying.
Start
Detail
Start