Sharp MX-M6570 User Manual page 789

MANUAL FINISHING►OPERATION OF MANUAL FINISHING
STAPLE FUNCTION
When a finisher (large stacker) is installed, you can staple loaded papers into a sheaf. (Staple function)
When a saddle stitch finisher (large stacker) is installed, you can staple papers in two places on the centerline and fold
them before being output. (Saddle stitch function)
Staple
• You can use the saddle stitch function for size 8-1/2 " × 11"R to 12" × 18" (A4R to A3W) papers.
• The saddle stitch function cannot be used with other manual finishing functions.
• If you load only one sheet of paper while the staple function is ON, the staple function is temporarily turned OFF and the
sheet is not stapled.
Selecting staple function
Tap your desired staple key in the [Staple].
The output tray is automatically selected based on the selected staple key.
Output Tray
Upper Tray
Middle Tray
Lower Tray
Staple Punch
Off Off
1 Staple 2 Hole
at Back Punch
1 Staple Saddle
Half Fold
at Front Stitch
2 Staples
To cancel the staple function:
Tap the [Off] key.
Saddle Stitch
Inserter
Plain 1
Upper Tray
8½x11
Plain 1
Lower Tray
8½x11
Type and Size
Fold
Accord-
Off Copies/Pages
ion Fold
Saddle Double
Fold Fold
CA
Z-Fold
Start
C-Fold Detail
7-10