Sharp MX-M6570 User Manual page 325

COPIER►OTHER FUNCTIONS
5
Others
Custom Image
Select Image to Operate.
Off
Custom
Stamp
Custom
Watermark
(3)
Back
• To cancel the custom image setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
Tap the [Start] key to start copying.
6
For settings related to custom stamp and custom water mark, see the following table.
For custom stamp
Print Page
Print Position
Print Angle
For custom watermark
Print Pattern
Exposure
Print Page
Print Position
Print Angle
Original
Change Size/Direction.
Stamp
Print Date and Stamp
(4)
2-Sided Copy
N-Up
Image (5)
Not
Put Multiple Pages in A Page
Print Page First Page
X: 0 mm
Print Position
Y: 0 mm
Preview
Print Angle 0°
Proof Copy
Print on cover/insert when
copy is made on cover/insert
3 8½x14
4 11x17 8½x11
Specify a page(s) for stamp copy. First Page or All Pages
Specify a position for stamp copy.
Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Specify the image watermark print pattern.
Transparent: Makes an original image transparent for stamp copy.
Overlap: Hides a watermark added to an original image for stamp copy.
Select the exposure of a watermark from nine levels.
Specify a page(s) for stamp copy.
First Page or All Pages
Specify a position for stamp copy.
Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Set [Print Page] or [Print Position].
After the settings are completed, tap
sequence.
CA
Start
2-106
and [Back] keys in