Sharp MX-M6570 User Manual page 39

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Automatic
This function controls the power optimally for each time period by analyzing the use of machine based on job logs
obtained during a certain time period.
If the machine does not have the 4-week job log information, the machine enters the template2 (Mode3 (Energy Saving
Priority1) between 8:00 and 18:00 hours). Then after that, it enters Mode4 (Energy Saving Priority2).
Manual
You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1
to 4".
Three-pattern template
Template
Template 1
Template 2
Template 3
Sleep Mode Power Level
Low Power: The machine switches to the power saving mode, but it takes some time to recover.
Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.
Motion Sensor Mode :
The motion sensor enables the machine to automatically wake from sleep mode.
Pattern
All Day "Energy Save
Priority2"
8:00-18:00 "Energy Save
Priority1"
8:00-18:00 "Job Start
Priority1"
Description of mode
The machine runs in the "Mode4 (Energy Saving Priority2)" all the
time.
The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00
and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and
18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
1-36