Sharp MX-M6570 User Manual page 243

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
Tap the [Detail] key to change to normal mode.
1
► CHANGING MODES (page 1-19)
Tap the [Copy Ratio] key.
2
3
Copy Ratio
Zoom
64%
11x17->8 1/2x11
8 1/2x11->5 1/2x8 1/2
77%
11x17->8 1/2x14
8 1/2x14->8 1/2x11
Other Ratio
Others
4
Copy Ratio
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Source
Input
mm
Others
• If you have entered an incorrect size:
Tap the [C] key, and then enter the correct size.
• To cancel all settings:
Tap the [CA] key.
Slightly Reduce
No. of copies
1
(3% Reduction)
Original
Change Size/Direction.
Auto Image
Paper Select
XY Zoom
Change Paper Feed Tray
2-Sided Copy
121%
100
( 25~400 )
% 8 1/2x14->11x17
Background Adjustment
129%
8 1/2x11->11x17
100%
5 1/2x8 1/2->8 1/2x11 Preview
Proof Copy
by Paper by Size
3 8½x14
4 11x17 8½x11
Slightly Reduce
No. of copies
1
(3% Reduction)
Original
Change Size/Direction.
Paper Select
Change Paper Feed Tray
2-Sided Copy
Output
Copy Ratio
Background Adjustment
Input
%
mm 0
Preview
Proof Copy
3 8½x14
4 11x17
8½x11
Tap the [by Size] key of the [Zoom] tab.
CA
Start
Specify the image size (dimensions of
the image to be enlarged or reduced)
and the output size (dimensions of the
enlarged and reduced images).
Tap the area of image size and output size, and enter the
CA sizes using the numeric keys.
After the settings are completed, tap
Start
2-24
.