Emerson Rosemount 8800D Series Reference Manual page 183

Alerts
March 2016
With alert simulation enabled:



Once alert simulation is active, individual alerts can be simulated by checking the check box
next to the desired alert condition. The device status indication located on the upper right
corner of the screen will change to show the device status associated with the simulated
alert. The simulated status will be displayed everywhere device status is displayed.
To view flow simulation settings:
1.
2.
Alerts
www.aotewell.com
The Enable/Disable Alerts Simulation screen displays.
The Simulation Active checkbox is checked to indicate the simulate enable jumper is
in the ON position.
The Simulation State displays Active.
The Simulated Alerts checkboxes are no longer grayed out.
Navigate to Service Tools >Simulate.
Select the Flow Simulation tab.
sales@aotewell.com
Industry Automation
Reference Manual
00809-0100-4772, Rev FA
173
+86-755-8660-6182