De Setting - RGBlink FLEX RS1 User Manual

3.2.5.1 DE Setting

Click the "DE Setting", and pop-up window as follows:
(1) Output Port: Select the out put port as requirement.
(2) Output Type: Select HDMI or DVI as needed.
(3) Color Range: Select Image or Video.
(4) Bits: 8 Bites as requirement.
(5) Brightness: The brightness adjustment range is between 0~128. Click "Set" to
confirm.
(6) De Swith: Select on or off.
(7) X, Y, Width, Height: Select the as requirement.
(8) LinePolarity: Select the Pos or Neg as requirement.
(9) ScenePolarity: Select the Pos or Neg as requirement and click "Set" to confirm.
FLEX RS1 User Manual
25