Chapter 2 Installing Your Product; Plugging In Signals; Plugging In Main Power - RGBlink FLEX RS1 User Manual

Chapter 2 Installing Your Product

2.1 Plugging in Signals

Connect signals to the product (ensure all devices are powered off first). Tighten
connector screws/locks where provided.Connect to XPOSE software by DB9 to
RJ45cable. RGBlink provides a DB9 to RJ45 cable for this connection, as a standard
accessories. Please check in the package for this cable..

2.2 Plugging in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
The power indicator on front panel lights.
User Manual
FLEX RS1
10