Chapter 2 Installing Your Product; Plugging In Signals; Plugging In Main Power - RGBlink FLEX DS1 User Manual

Chapter 2 Installing Your Product

2.1 Plugging in Signals

(1) Connect the device to computer with a LAN cable. Control the output with computer.
(2) Connect HDMI/DVI3 OUT to HDMI/DVI IN, the signal processed by computer is the output
signal.
(3) Connect DVI1/DVI2 OUT to a display or LED screen which has DVI/HDMI connector. The
display is based on the settings on the operation interface.
DVI connection:
HDMI to DVI connection:
Note:
HDMI OUT or DVI3 OUT is connected to DVI IN of the device.

DVI1 OUT or DVI2 OUT is connected to the display or LED screen.


2.2 Plugging in Main Power

Connect the IEC cable to device and plug into the wall socket.
Chapter 2: Installing Your Product
5