Table of Contents
Advertisement
Chapter 2 Installing Your Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.
2.2 Plugging in Main Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
2.3 Turning on Your Product
Turn the power switch on the rear of the product to the ON position.
OLED display will show as below, completing initialization before loading last settings and
input/output configuration.
On delivery, HDMI will be the default input signal, and the output format is defaulted to
1920x1080x60.
CP 3072PRO
CP 3072PRO
V 1.22
Initializing...
User Manual
16
Advertisement
Table of Contents
