Table of Contents
Advertisement
Chapter 2 Installing Your Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.
2.2 Plugging in Main Power
Connect the power cord to device and plug into wall socket. Turn on power at wall socket.
2.3 Turning on Your Product
Turn the power switch on the rear of the product to the ON position.
The LCD touch display will show the start-up interface and show the default menu after
completing initialization as below. On delivery, the output format is defaulted to SMPTE
1080P@60.
Starting......
Wait a moment
MSP 200PRO
User Manual
10
Advertisement
Table of Contents
