Table of Contents
Advertisement
6-2
Data, Tests & Reports
Export Tests Manually
To manually export test data to a shared network folder or USB storage device, use the following
procedure.
Note: You cannot use this procedure if data export to FORUM has been enabled (FORUM Test
Database setting On under the Report Output
Save Reports Manually
You can use the following procedure to save test reports to a USB storage device, network shared
folder, or an EMR system. You cannot use this procedure if FORUM data export has been enabled.
HFA3 Instructions for Use
settings).
1. Select the Tests button at the bottom of the Patient screen.
(see
page
1).
2. In the Tests screen:
• Highlight individual tests to select a limited number of tests
to export, OR choose Select All to export all of the tests.
• Choose Clear Selection to clear your choice.
• Select Save To (choose between Save to HFA3 Format or Save
to HFAII-i Format) and save selected tests to a USB device or
network location. A data transfer summary screen will appear
with details of the export process.
1. Select the Reports button at the bottom of the Patient
screen.
2. In the following screen, tests for the patient will be listed.
Highlight one or more tests.
3. Select Save (local database mode), DICOM EPDF (for a
DICOM EMR).
4. If you selected Save, select/confirm the export location in
the next screen. Choose Select if exporting to a mapped
shared folder or USB.
5. A progress screen will appear, followed by a message
stating export results.
Options from here are:
Select Reports - change the selection of default report types
you wish to save for the selected tests.
Clear Selection - clears the highlighted tests.
2660021166131 Rev. A 2018-11
Go to Contents
Advertisement
Table of Contents
Troubleshooting
