End The First Eye Test; Test The Second Eye And End Test; Review And Save Results - Zeiss Humphrey Field Analyzer 3 Instructions For Use Manual

4-14
Setup and Testing

End the First Eye Test

When the test for the eye is complete, an alert sounds and a message displays. Select OK.
If both eyes were selected for testing, the instrument returns to the
Test screen:
• Select Start (Other) Eye to set up testing for the other eye. Test
data for the first eye will be locally saved. To skip the next eye, select
Skip (Other) Eye to go directly to the Results screen.
• Select Restart to delete the results and test the first eye again.
• Select Cancel to cancel the entire exam and delete the results. 
Note: You must confirm or cancel your choice if you select Restart or
Cancel.

Test the Second Eye and End Test

The screen automatically displays the Live Eye image, refractive correction, and trial lens information
of the next eye being tested. Set up the patient and test the second eye following the same
procedures used for the first eye.
When the second eye is complete, select OK. In the next screen, select Review Results to view test
results, restart the test, or cancel the test.
Note: To cancel the entire test including results from the first eye, you will need to manually delete
the results from the first eye. See
instrument is set up to export data to FORUM, manually export data to the server (Settings >
Network > Manual data export) and delete the exam from FORUM. Results from the first eye should
also be manually exported if the second eye exam fails and you would like to save data from the first
eye.

Review and Save Results

Review Results displays the test results for each eye tested. The
operator can add notes to the exam. Final changes to reports can be
made in the Reports drop-down list before saving the exam or
sending exam data to the server archive. If you do not want reports
to be printed and/or exported automatically, deselect reports.
Select Save and Exit. A message will display when exam data are
being successfully saved, either to the local database or to the server
archive. A message will also display if the exam has not been
successfully saved.
The HFA3 then returns to the Patient screen.
HFA3 Instructions for Use
"Delete Tests," on page 6-4 to do this on the instrument. If the
2660021166131 Rev. A 2018-11
Go to Contents