Cutting Unit; Tightening Torques; Play - Husqvarna Rider 100 series Workshop Manual

Cutting unit

Type
Cutting heights, 5 positions, mm/inch
Blade length, mm/inch
Note. 1: The power rating of the engine is the average net output (at the specified rpm) of a typical production engine
of the model, measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual
power output for the engine installed in the final machine will depend on the operating speed, environmental conditions
and other variables.
Note. 2: Emission of noise to the surroundings measured as sound power (LWA) in accordance with the EU directive
2000/14/EC.
Note. 3: Sound pressure level according to EN 836. Reported data for the noise pressure level has a typical dispersion
(standard deviation) of 1.2 dB(A).
Note. 4: Vibration level according to EN 836. Reported data for the vibration level has a typical dispersion (standard
deviation) of 0.2 m/s (steering wheel) and 0.8 m/s
2

Tightening torques

Steering cable pulley
Blade belt pulley
Blade
Belt tensioner
Engine mounting screws
Gearbox mounting screws
Engine belt pulley

Play

Brake lever to stop R115 C/R120 C
Brake lever R115 C/R120 C:
Brake cable R115 C/R120 C:
Hydrostat pedal wire R115 C/R120 C:
10 – English
Combi unit
25-75/1-3
430/17
(seat).
2
57-61 ft/lb (28-32 Nm)
57-61 ft/lb (45-50 Nm)
57-61 ft/lb (45-50 Nm)
57-61 ft/lb (15-25 Nm)
57-61 ft/lb (20-25 Nm)
57-61 ft/lb (20-25 Nm)
52 ft/lb (70 Nm)
0 - 1 mm
7 - 9 mm
1 mm
0 mm
Combi unit
25-75/1-3
430/17
21-24 lbft
32-36 lbft
32-36 lbft
10-18 lbft
14-18 lbft (M8 8.8 = 24Nm)
14-18 lbft (M8 8.8 = 24Nm)
50 lbft
(0 - 0.040")
(1/4" - 3/8")
(0.040")