Drive; Cutting Unit - Husqvarna Rider 100 series Workshop Manual

Drive

Rider 111B5 and 112 C5 has a manual gearbox
with 5 forward gears, a neutral position and 1
backward gear. This gearbox is a so-called "inline"
type, which means that changes can be made
directly from neutral to fifth without stopping at each
intermediate gear.
Manual gearbox to Rider 111B5.

Cutting unit

The whole Rider range is equipped with front-
mounted cutting unit to mow efficiently even in
confined spaces.
The Rider 100 series has a cutting width of 850 mm
(34") or 950 mm (38"), Combi.
BioClip/Combi.
The Rider 111 B, 112 C, 115 C and 120 C are
equipped with hydrostatic transmission that
provides the driver with full driving control. The
speed is controlled variably using the pedals
forward or reverse.
Hydrostatic transmission to Rider 111 B.
The Combi-unit, equipped with a BioClip-plug, finely
chops the cuttings to fertilizer. Without the BioClip-
plug the unit works in the same way as a rear
ejection unit.
Removing the BioClip plug
Design and Function
English – 21