Husqvarna Rider 100 series Workshop Manual page 34

Repair instructions
8 Pull off belt 2 from the transmission, first from
the rear belt pulley and then from the front.
2 1
9 Loosen belt 3 (cutting unit drive) from the
tension roller. Then pull it off from the center belt
pulley, then from the belt pulley of the articulated
steering.
34 – English
10 Remove the rear attachments of both steering
3
11 Loosen the articulated shaft's screw from below.
Rider 111 B5/112 C5
12 On Rider 111 B5 and 112 C5 a belt guide (1)
cables.
1
must be removed. On 111 B5 the muffler (2)
must also be removed.
Fold the plate (3) out of the way.
2
3
1