Pitney Bowes DM Series Installation And Operator's Manual page 10

Reference - Network administrator needs MAC address
In rare circumstances your Network Administrator may require the MAC Address of the Constant Connection network adapter. This can be obtained in the following way:
DM220i series
1. Press Options.
2. Press Page Down twice.
3. Select Connect - Data Centre.
4. Select LAN Settings.
5. Press Page Down.
6. The network adapter's MAC
address will be displayed. Take
a note of this for your Network
Administrator.
7. Press Home to return to the
Home Screen.
SDC876B Constant Connection (LAN Connection) Guide
DM300c and
DM400c series
1. Press Options.
2. Press Page Down.
3. Select Data Centre Options.
4. Press Page Down.
5. Select Network Settings.
6. The network adapter's MAC
address will be displayed. Take
a note of this for your Network
Administrator.
7. Press Home to return to the
Home Screen.
DM475/
DM450+
1. Press Options.
2. Press Page Down.
3. Select Data Centre Options.
4. Press Page Down.
5. Select Network Settings.
6. The network adapter's MAC
address will be displayed. Take
a note of this for your Network
Administrator.
7. Press Home to return to the
Home Screen.
EN
DM500 to DM1000
IntelliLink® Control
Centre
1. Press Options.
2. Select Set Up.
3. Select Phone/Network Set Up.
4. Press the Down Arrow  and
select Network Settings.
5. Select Mailing System
Network Settings.
6. Select MAC Address. The
network adapter's MAC address
will be displayed. Take a
note of this for your Network
Administrator.
7. Press the Left Arrow  key to
exit the setup menu.
<< Return to Contents