Creating Workorders At The Analyzer; Creating Multiple Workorders - Siemens ADVIA 2400 Operator's Manual

Creating workorders at the analyzer

1. At the Menu Panel, select
2. Select
3. In the Posi.no. boxes, enter the sample position number.
4. In the Samp.no. box, enter the sample identification number.
5. Verify that the System Dilution Mode, Container Type, Sample Type, Dil. factor,
Sex, and Blood collection date entries are correct.
6. As needed, provide entries for Comment and Age.
7. Order tests by any of the following methods:
•
In the Test table, select each test or ratio you want to run.
•
In the Test-tbl no. box, enter the number of each test you want, then press the
period (.) key.
•
In the Profiles area, select each profile you want to run.
8. To de-select all tests, select
9. To confirm, select
10. To erase all entries, select
11. To confirm, select
12. Select
The Number of workorder box increments. Automatic incrementing is assigned using
the Entry Setup window. If autoincrement is on, a new workorder displays with the
next sample number and position number incremented.
13. You can create another workorder or select
If necessary, select

Creating multiple workorders

1. At the Menu Panel, select
2. Enter information for the first sample:
NOTE:
a. Select New located above the Enter.
b. Select Routine or Interr.
c. In the Posi.no. boxes, enter the starting sample position number (Tray and Cup
numbers).
d. In the Samp.no. box, enter the starting sample identification number.
e. Verify that the System Dilution Mode, Container type, Sample type, Dil. factor,
Sex, and Blood collection date entries are correct.
f. As needed, provide entries for Comment and Age.
g. Order tests by any of the following methods:
Operating the System
Request
or .
Routine Interr
Delete Tests
.
Yes
Batch Func
.
Yes
.
Enter
to clear the window for entry of the next workorder.
New
Request
Enter only those items you want replicated.
, then select
Order Entry
.
.
to leave.
Exit
then select
Order Entry
.
.
73