User Code Settings Window; New Test Definition Window; Ise Parameter Settings Window; Print Form Settings Window - Siemens ADVIA 2400 Operator's Manual

User Code Settings window*

Use this window to enter a user code, user name, and user password for up to 50
operators who are authorized to use the chemistry system.
Perform any of the following tasks at this window:
•
create/change entries for an authorized user
•
delete the user code entries for a specific user
•
delete all user code entries
•
print a list of the user code entries

New Test Definition window*

Use this window to set up new tests, calibration definitions, sample container definitions,
and QC sample definitions. The New Test Definition window provides easy step-by-step
procedures.

ISE Parameter Settings window*

Use this window to set the analysis parameters for ISE measurement of Na, Cl, and K
electrolytes.
Perform any of the following tasks at this window:
•
enter settings for individual electrolytes (Na, Cl, and K)
•
enter settings for all electrolytes
•
check CTT settings

Print Form Settings window*

Use this window to design or edit a print form for sample results. When you print reports
from the Print Report or the Review/Edit window, you will select a print form created
here.
There are two sample report formats provided:
•
A Patient Chart report (Chart.frm) is formatted for a single sample.
•
A Consolidated report (Consolid.frm) is formatted for multiple samples.
You create or edit each print form by placing design elements, such as free-text, sample
attributes, and result data (for example, test name, result value, and flags) on a form page
that has the same dimensions and orientation as the printed page. A grid overlays the
form page. This helps you to position precisely the design elements.
58 ADVIA 2400 Operator's Guide