Siemens ADVIA 2400 Operator's Manual page 39

Changing the system password
Use this procedure to change the password for the supervisor ID.
1. At the System menu, select
2. At the Change Password window, enter the old password, then enter the new
password.
3. Enter the new password again in the Confirm password box.
If you are setting the password for the first time, leave the Old password box blank.
4. To change the password, select
The next time someone logs in with this ID, the new password will be required.
Displaying version information and reading or writing a memo
Use this procedure to get information about the files currently in the system software.
1. At the System menu, select
The Version Information window displays the system version number and other
information.
2. To close the window, select
Printing the screen
1. At the System menu, select
The entire screen (as it displays on your monitor) prints.
2. Print the screen to the clipboard.
Logging on as a different user
Use this procedure to log on a different user. All results obtained for this operator
annotates to the corresponding user code from the User Code Settings window.
1. At the System(S) menu, select
2. In the Please enter password box, enter the user password.
User passwords assigned in the User Code Settings window are not case sensitive.
3. Select
You are now logged in as the new user.
Exiting the system
Use this procedure to close the system software.
1. At the System(S) menu, select
2. When prompted, select
In a few seconds, the Startup window opens. From there, you can restart the software
or shut down Windows.
System Overview
Change password
Version info
Return
Screen Print
.
OK
, then select
Yes
.
.
Change
.
.
.
.
Change User
.
Exit(x)
when prompted again.
Yes
39