Running An Interrupt (Stat) Sample - Siemens ADVIA 2400 Operator's Manual

5. Select
priority processing.
You can select more than one position at a time and to assign the same container type
to all.
6. To begin the run, select
From the optional universal rack handler or external transport
1. Select the second General smp. Analyze box (below Out side analyze).
2. To begin the run, select
3. Load the racks on the rack handler or the universal rack handler.

Running an interrupt (STAT) sample

Running an interrupt sample when sampling is in progress (START)-SMP
LOAD NG
1. Download or create the sample workorder and select
workorder.
NOTE:
sample is already on the sample tray and already has a workorder.
2. At the Operation Panel, select
3. Load the new sample on the sample tray (STT).
4. At the Operation Panel, select
Running an interrupt sample when sampling has stopped (STOP)-SMP
LOAD OK
1. Select Interr. (interrupt) option on the sample workorder.
2. Load the sample on the sample tray (STT).
NOTE:
Assign or Sample confirmation window that displays after reading the barcoded
samples.
3. To begin sampling, at the Operation Panel, select
Operating the System
Temp.cup/tube select
.
Start
.
Start
You can also select the priority using the Cup/Tube Assign window if the
Priority can be set using workorder Interr. designation and the Cup/Tube
to change container types and select samples for
Interr
to halt sampling.
Pause
to resume sampling.
Start
Start
. (interrupt) option on the
.
81